"Agatha" Hair Pin Tutorial - PDF File ONLY

Please Note: This is a PDF download—no physical product will be shipped. Thank you!

Get ready to create something beautiful with this 15-page tutorial, packed with over 60 step-by-step photos guiding you through making a stunning, swirly hair pin!

In this tutorial, you’ll master hammering techniques to add depth and dimension to your pieces, along with incorporating intricate woven elements.

Each page is filled with clear, high-quality images and detailed captions to ensure you feel confident at every stage.

Ready to dive in? Let’s get started!

Materials:

• (x1) 10" Segment 14 or 12 gauge wire (Dead-Soft) - [I used 14 gauge for the frame].
• (x2) 7" Segments 16 Gauge Round Wire (Dead-Soft)
• (x1) 5" Segment 12 Gauge Round Wire (Dead-Soft)
• About 15' 28 Gauge Round Wire (Dead-Soft)
• 5-10 Beads of your choice. (I used 4mm Amethyst Roundelle beads from Casdans).

Tools:

• Chain Nose Pliers
• Round Nose Pliers
• Flush Cutters
• (Optional) Flat Nose Pliers
• Mandrel/Dowel (About 24mm in diameter).
• Ruler
• Sharpie
• Chasing Hammer
• Steel Bench Block
• (Optional) Rubber Mallet
• Needle File
• Sand Paper: 600, 1000, 2000 and 3000 Grit

What to expect when purchased:
You will get an email confirming your order and then a link to download your tutorial. You can do this from your email. Please allow a minute or two for your order to go through before attempting to download.

Please message me if you have any issues! Thanks!
- Ellie

**Please Note**
You may sell your finished work. But please be sure to give credit to Elizabeth at Ellie's Handcrafted Jewelry.

All photos and captioning within this tutorial belong to Ellie's Handcrafted Jewelry. You may not copy, sell or distribute this pattern under any circumstance!

You may not teach this content without my written consent.